We have always believed that the best ideas for interior decoration are those that clearly…
The painting of a dwelling requires time but also to respect basic steps such as the preparation of surfaces or the application of successive layers of paints. The objective is to have a perfectly smooth surface and with a homogeneous layer of paint.
01 – Everything is in the preparation
The preparation work is the longest and the most complex to realize. But it also the one that will guarantee a high quality of finish for the paintings and thus ensure an optimal decoration of the house or the apartment. It is necessary during this preliminary stage to prepare the surfaces to be painted. If they cover the walls with wallpaper. It will remove and remove the glue, without forgetting to wash the wall to remove all the asperities present. For a wall of place, it will be necessary to make sure that they have done the sanding. To coat and sand again the damaged parts and to make sure not to have traces of humidity. Which could foreshadow among others that saltpeter is present? It is only when the surfaces are perfectly smooth and dry that the work of painting can begin.
02 – The choice of painting
The choice of painting is important because some are better qualities than others and it is often the price that will determine the quality of the painting. The “first price” paints are often less covering because they are more diluted. They will be suitable for touching up of paintings or the painting of a little-exposed surface (for example, behind the furniture of a kitchen, in a garage. A saddle not exposed to light …). It is, therefore, necessary to choose a high-coverage paint and does not forget to buy undercoat. It is white paint that will allow applying a homogeneous layer of paint on the wall and ceiling. This first layer makes it possible to reduce the paint absorption of certain porous walls and to homogenize surfaces that have different hues.
03 – The application of paints
They prepare the wall, the painting is ready. It remains only to apply the underlayer, then the two layers of successive paintings. It is necessary for each to apply a first time horizontally the painting with the roller then to distribute the painting of a sheet homogeneous layer in vertical. The finishing direction must be the same on the whole surface, for the walls; we go from top to bottom or from bottom to top. For ceilings, it is advisable to paint in the direction of daylight. That is to say that if the room consists of a window. It will paint directly from the window. It makes it possible not to see the traces of rollers and this offers a superior finish result.interior, interior tips, painting work